Reference
![[Processing Guide]](../../graphics/callout/molding-quick2.gif)
![[Trouble Guide]](../../graphics/callout/molding-trouble2.gif)
![[Molding Guides]](../../graphics/callout/molding-guides2.gif)
Processing Conditions
The temperatures and processing conditions listed here are intended as guidelines for molders and designers. In some cases, relatively broad ranges are necessary to accommodate variations in compound formulas.
Injection molding is a complex science; best results may only be achieved after several trials. RTP Company's technical support specialists can assist you with determining optimum settings for your unique compound.
![[Link]](../../graphics/callout/whichtouse.gif)
RTP 100 Series — Polypropylene (PP)
RTP 200 Series — Nylon 6/6 (PA)
RTP 200 A Series — Nylon 6 (PA)
RTP 200 B Series — Nylon 6/10 (PA)
RTP 200 C Series — Nylon 11 (PA)
RTP 200 D Series — Nylon 6/12 (PA)
RTP 200 E Series — Amorphous Nylon (PA)
RTP 200 F Series — Nylon 12 (PA)
RTP 200 H Series — Impact Modified Nylon 6/6 (PA)
RTP 200 K Series — Polyarylamide (PARA)
RTP 300 Series — Polycarbonate (PC)
RTP 400 Series — Polystyrene (PS)
RTP 500 Series — Styrene Acrylonitrile (SAN)
RTP 600 Series — Acrylonitrile Butadiene Styrene (ABS)
RTP 700 Series — High Density Polyethylene (HDPE)
RTP 700 A Series — Low Density Polyethylene (LDPE)
RTP 800 Series — Acetal (POM)
RTP 900 Series — Polysulfone (PSU)
RTP 1000 Series — Polybutylene Terephthalate (PBT)
RTP 1100 Series — Polyethylene Terephthalate (PET)
RTP 1200 M Series — Thermoplastic Polyurethane Elastomer (TPU)
RTP 1200 S Series — Ester-based Thermoplastic Polyurethane Elastomer (TPU)
RTP 1200 T Series — Ether-based Thermoplastic Polyurethane Elastomer (TPU)
RTP 1300 Series — Polyphenylene Sulfide (PPS)
RTP 1400 Series — Polyethersulfone (PES)
RTP 1500 Series — Polyether-Ester Block Copolymer Thermoplastic Elastomer (COPE)
RTP 1700 Series — Modified Polyphenylene Oxide (PPO)
RTP 1800 Series — Acrylic (PMMA)
RTP 1800 A Series — Polycarbonate/Acrylic Alloy (PC/PMMA)
RTP 2100 Series — Polyetherimide (PEI)
RTP 2200 Series — Polyetheretherketone (PEEK)
RTP 2200 A Series — Polyetherketone (PEK)
RTP 2300 Series — Rigid Thermoplastic Polyurethane (RTPU)
- Specialty Compounds (A subseries)
- Long Fiber Compounds (A subseries)
- Specialty Compounds (C subseries)
RTP 2500 Series — Polycarbonate/ABS Alloy (PC/ABS)
RTP 2700 S Series — Saturated Styrenic Block Copolymer Thermoplastic Elastomer (SEBS)
RTP 2700 U Series — Unsaturated Styrenic Block Copolymer Thermoplastic Elastomer (SBS)
RTP 2800 Series — Thermoplastic Polyolefin Elastomer (TEO)
RTP 2900 Series — Polyether-Block-Amide Thermoplastic Elastomer (COPA)
- Specialty Compounds
RTP 3000 Series — Polymethylpentene (PMP)
RTP 3100 Series — Perfluoroalkoxy (PFA)
RTP 3200 Series — Ethylene Tetrafluoroethylene (ETFE)
RTP 3300 Series — Polyvinylidene Fluoride (PVDF)
3400 Series — Liquid Crystal Polymer (LCP)
- Specialty Compounds ( -3 subseries)
- Specialty Compounds ( -4 subseries)
RTP 3500 Series — Fluorinated Ethylene Propylene (FEP)
RTP 4000 Series — Polyphthalamide (PPA)
RTP 4000A Series — Hot Water Moldable Polyphthalamide (PPA)
RTP 4100 Series — Polyetherketoneketone (PEKK)
RTP 4200 Series — Thermoplastic Polyimide (TPI)
RTP 4300 Series — Polysulfone/Polycarbonate Alloy (PSU/PC)
RTP 4400 Series — High Temperature Nylon (HTN)
RTP 4700 Series — Polytrimethylene Terephthalate (PTT)
6000 Series — Specialty Thermoplastic Elastomer (TPE)
PermaStat® is a registered trademark of RTP Company
Interact with RTP Company
Corporate Headquarters:
U.S. toll-free 1-800-433-4787 • Voice (507) 454-6900 • Fax (507) 454-2041
RTP Company • 580 East Front Street • Winona, MN, 55987, USA
Internet www.rtpcompany.com • E-mail rtp@rtpcompany.com
© 1995-2008 RTP Company • Warranty Disclaimer